Deco Silacast [A deep rich looking sealer]
Silacast is designed to renew your masonry colors and display a continuous wet look appearance. It is not glossy or shiny. It’s a proprietary alkyd sealer that penetrates beneath the surface therefore last longer than a film forming or acrylic product. Our multi-polymer emulsion formulation prevents stains and water intrusion.
- Water Based – No Solvents – No Odor – Safe – UV Resistant
- Full-body look – Provides beautiful depth – No glossy plastic look
- Non-Hazardous – USDA Approved 65%
- Extremely LOW VOC Content (Water, Soybean, Natural Oils)
- Resistant to Mildew Growth
- Long-term resistance to water blushing
A must have sealer to protect your – Brick, Concrete Pavers, Stone and Wood
Description
SilaCast Beauty Enhancing Sealer is the first non-slip, biodegradable sealer to take the country by storm!!!
While other products leave a matte, low or high gloss on the surface SilaCast actually penetrates deep in the pores of the pavers enhancing the color and leaving your pavers beautifully new looking. Our two part resin formulation allows smaller resins to penetrate deeper giving a longer lasting result. Our larger resins remain near the surface pulling out colors from your masonry giving a new look that “pops” the colors and creates depth.
Extremely low VOC alkyd latex emulsion that creates a new look appearance and revitalizes the color of interior and exterior porous surfaces such as brick pavers, concrete pavers and surfaces that are porous and colorful. Desired applications include patios, pool decks, walk ways, driveways, horizontal surfaces.
Silacast can be used on stamped concrete but conditions have to be perfect. The surface must not have any previous sealers/coatings. A stripper such as StripaCast is recommended.
Product Benefits:
Chemical and Hot Tire Resistance, Excellent Adhesion, Water Blushing Resistant, UV Protected
Coating Performance:
Chemical Resistance on Cementitious Backer Board 24 Hr. spot test / 48 Hr. recovery:
- Gasoline – No Effect
- Engine Oil – Slightly Darkened
- Transmission Fluids – Slightly Darkened
- Sodium Hydroxide – No Effect
- Ethanol – No Effect
- Brake Fluid – No Effect
- Antifreeze – Very Slightly Darkened
- Bleach – No Effect
- Salt Water / 5% Solution – No Effect
NOTE: Silicast performance is comparable to commercially available solvent borne wet look sealers. Solvent sealers have high fumes, cause headaches, irritation to eyes, etc. Silacast is a water based product and built green for the environment.
Rock Solid Concrete Sealing Systems Serves the Greater Kansas City Area
Home Concrete Sealing Driveway Sealing Our Concrete Seal Why Seal Your Concrete? Contact Us
(816) 406-5995
or
